English-112
004-1032-00
TP210 Rev. A
© 2012 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
[Revised: mo/dd/yr]
Touch Pad / Display Panel - continued
Replacement
MA666000i
Step 1: Remove touch pad / display panel.
A) Remove top cover.
B) Disconnect ribbon harnesses from display panel (J2 & J3).
C) Remove two screws.
D) Slide display panel out from under tab.
E) Peel touch pad off of top cover.
Note: Remove adhesive residue w/ citrus-based solvent that is safe for
use on plastics.
Equipment Alert
Be sure the arrow on the display panel points UP when
installing panel.
Step 2: Install touch pad / display panel.
A) Peel backing from touch pad.
B) Feed ribbon harness thru slot.
C) Position touch pad on top cover.
D) Slide display panel under tab, secure with two screws.
E) Connect ribbon harnesses to display panel (J2 & J3).
F) Install top cover.
Tab
Slot
To Next Page
Loading...
