Midmark M11 - Fuses; Adjusting the Dry Time

English-81
004-1032-00
TP210 Rev. A
© 2012 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
[Revised: mo/dd/yr]
Fuses
MA667701i
F2
F1
Fuse Ratings:
115V models F1: 0.250 amp, 250V, Slo-Blo, 1/4” x 1-1/4”
F2: 15 amp, 250V, Fast-Acting, 1/4” x 1-1/4”
230V models F1: 0.125 amp, 250V, Slo-Blo, 5 mm x 20 mm
F2: 8 amp, 250V, Fast-Acting, 5 mm x 20 mm
Adjusting the Dry Time
To adjust the dry time...
A) Press desired cycle button (Unwrapped, Pouches, etc.).
B) Press the < P > button.
C) Press the < + > or < - > button to adjust dry time.
D) Press the < P > button.
Note: The adjusted dry time is stored in memory for the selected cycle.
Repeat these steps for other cycles as required.
midmark.com
Style A