English-75
004-1032-00
TP210 Rev. A
© 2012 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
[Revised: mo/dd/yr]
Service Diagnostics - continued
Test Selection Screen
Press the Start button to initiate the I/O Test.
is test allows you to energize the air valve, vent valve, ll
valve, door motor, and heating element independently without
running a cycle.
is test also displays the temperature / pressure inside the
chamber, and the status of the high-limit thermostats, door
switch, and the water level sensor.
Press the Stop button to show the last ve error codes dis-
played on the unit.
Press the Handpieces button to initiate the Keytest.
is test allows you to check the functionality of the
buttons on the touch pad.
To Next Page
Loading...
