Mikro DPM680 - Maximum Power Demand

47
Meter Operations 3.6.5 3.6.6
TouCH BuTTon funCTions:
• to increase the number, touch the UP (F2)
button.
• to decrease the number, touch the DOWN
(F3) button.
• to select the next eld to change, touch the
NEXT (F4) button and repeat the above 2
steps.
• to save the settings and/or return to the
Power Demand page, touch the BACK (F1)
buttons.
The user will be prompted to conrm the saving
of settings.
noTE:
The demand interval in secs must be whole
number multiples of the number of sub
intervals and the sub interval period must be
longer than 15 sec.
noTE:
When the Demand Interval is changed, the
sub intervals defaults to 2. This can however,
be changed separately when the NEXT (F4)
button is touched.
3.6.6
MaxiMuM powEr
DEManD
The Maximum Power Demand page shows the
recorded maximum real, reactive and apparent
power demand with the corresponding time and
date since the last reset as shown in Fig 59:
Fig 59 : Maximum Power Demand page
TouCH BuTTon funCTions:
• to abort saving the settings and return to the
Power Demand page, touch the NO (F3)
button.
• otherwise, touch the YES (F2) button to save
the settings and the user will be prompted for
password authentication as per section 3.2.