Milesight UG63 - Page 48

48
"MS-CHAPv2".
Global Traffic
Forwarding
All of the data traffic will be sent out via L2TP tunnel after
this function is enabled.
Remote Subnet
Enter the remote IP address that L2TP protects.
Remote Subnet Mask
Enter the remote netmask that L2TP protects.
Key
Enter the password of L2TP tunnel.
Table 3-3-2-5 L2TP Parameters
Figure 3-3-2-7
Advanced Settings
Item
Description
Local IP Address
Set tunnel IP address of L2TP client. Client will obtain
tunnel IP address automatically from the server when it's
null.
Peer IP Address
Enter tunnel IP address of L2TP server.
Enable MPPE
Enable MPPE encryption.
Address/Control
Compression
For PPP initialization. User can keep the default option.
Protocol Field
Compression
For PPP initialization. User can keep the default option.
Asyncmap Value
One of the PPP protocol initialization strings. User can keep
the default value. Range: 0-ffffffff.
MRU
Set the maximum receive unit. Range: 64-1500.
MTU
Set the maximum transmission unit. Range: 64-1500
Link Detection Interval
Set the link detection interval time to ensure tunnel