Milesight UG65 - Page 70

UG65 User Guide
www.milesight-iot.com
70
Figure 3-3-6-9
PPTP Advanced Settings
Item
Description
Local IP Address
Set IP address of PPTP client.
Peer IP Address
Enter tunnel IP address of PPTP server.
Enable NAT
Enable the NAT faction of PPTP.
Enable MPPE
Enable MPPE encryption.
Address/Control
Compression
For PPP initialization. User can keep the default option.
Protocol Field
Compression
For PPP initialization. User can keep the default option.
Asyncmap Value
One of the PPP protocol initialization strings. User can keep
the default value. Range: 0-ffffffff.
MRU
Enter the maximum receive unit. Range: 0-1500.
MTU
Enter the maximum transmission unit. Range: 0-1500.
Link Detection Interval
(s)
Set the link detection interval time to ensure tunnel
connection. Range: 0-600.
Max Retries
Set the maximum times of retrying to detect the PPTP
connection failure. Range: 0-10.
Expert Options
User can enter some other PPP initialization strings in this
field and separate the strings with blank space.
Table 3-3-6-8 PPTP Parameters