Milestone Srl MA213-003 – DMA-80 EVO – User Manual
104
5.15.2.4 Reference
Parameters of reference samples: here you can set the limits of the calibration
factor of your reference samples. When it is out of range you can choose if
continue anyhow with next measurements already set or stop the analysis.
5.15.2.5 Data files
Save of data after one measurement: if activated, the data is saved everytime
after one measurement
Directory Recycled: With this option it is possible to activate a waste basket.
When deleting a file – if not already available – a folder named “Recycled” is
created on the Flash Card. The file will be stored there before the final
cancellation.
CSV import: This option can be set with Service login. If activated, it is possible
to import a CSV file from an external source.
The standard model of CSV file compatible with the DMA.80 software is supplied
with the USB key shipped with terminal or PC software package
To Next Page
