Milestone Srl MA213-003 – DMA-80 EVO – User Manual
111
5.15.2.9 Balance
In this page you can connect and configure a balance in order to transfer the sample weight directly to
software. Different models can be compatible with DMA-80 software, anyway Milestone strictly
recommends the Sartorius BCE224i-1S model.
The Sartorius BCE224i-1S balance can be directly connected to control terminal or PC through the proper
connecting cable.
Milestone offers the Sartorius BCE224i-1S balance model through two special kits based on the type of
connection:
a) P/N WAA0220-IT: Sartorius balance mod. BCE224i-1S + interface cable RJ45/RS232 (9pins) for
connection with terminal 660/1660.
The interface cable RJ45/RS232 (9pins) is also sold separately with p/n TER6477 or it can be created by
the user.
P/N TER6477. The picture is purely indicative
To Next Page
Loading...
