Miller PipeWorx 400 User Manual

OM-253 906 Page 71
Stainless Steel
Process
Wire Size
mm
Wire Feed Speed
mpm
Arc Length Shielding Gas
RMD Stainless Steel
0.9 2.5-8.9 W/5.1 Nominal +3.0 to −3.0
w/zero Nominal
C2
0.9 2.5-8.9 W/5.1 Nominal +3.0 to −3.0
w/zero Nominal
98/2 Ox
1.0 2.5-7.6 w/4.4 Nominal +3.0 to −3.0
w/zero Nominal
C2
1.0 2.5-7.6 w/4.4 Nominal +3.0 to −3.0
w/zero Nominal
98/2 Ox
1.2 1.9-6.4 w/3.8 Nominal +3.0 to −3.0
w/zero Nominal
C2
1.2 1.9-6.4 w/3.8 Nominal +3.0 to −3.0
w/zero Nominal
98/2 Ox
ProPulse
Stainless Steel Using A
Positioner
(Rolling The Pipe)
0.9 1.9-19.8 w/5.1 Nominal +3.0 to −3.0
w/zero Nominal
C2
0.9 1.9-19.8 w/5.1 Nominal +3.0 to −3.0
w/zero Nominal
98/2 Ox
1.0 1.9-19.8 w/4.4 Nominal +3.0 to −3.0
w/zero Nominal
C2
1.0 1.9-19.8 w/4.4 Nominal +3.0 to −3.0
w/zero Nominal
98/2 Ox
1.2 1.9-19.8 w/3.2 Nominal +3.0 to −3.0
w/zero Nominal
C2
1.2 1.9-19.8 w/3.2 Nominal +3.0 to −3.0
w/zero Nominal
98/2 Ox
ProPulse
Stainless Steel
Welding In Position
0.9 2.5-19.8 w/5.1 Nominal +3.0 to −3.0
w/zero Nominal
C2
0.9 2.5-19.8 w/5.1 Nominal +3.0 to −3.0
w/zero Nominal
98/2 Ox
1.0 2.5-19.8 w/4.4 Nominal +3.0 to −3.0
w/zero Nominal
C2
1.0 2.5-19.8 w/4.4 Nominal +3.0 to −3.0
w/zero Nominal
98/2 Ox
1.2 1.9-19.8 w/3.2 Nominal +3.0 to −3.0
w/zero Nominal
C2
1.2 1.9-19.8 w/3.2 Nominal +3.0 to −3.0
w/zero Nominal
98/2 Ox

Miller PipeWorx 400 Specifications

General

Amperage Range	5 - 400 A
Duty Cycle	60% at 400 A
Processes	MIG, Flux-Cored, Stick, DC TIG, Pulsed MIG
Output Voltage Range	10 - 44 V
Wire Feed Speed	50 - 780 IPM