Chapter 2 Printing
59
• Do not use the torque adjustment handle. Overtightening with the torque adjustment handle
may damage the take-up unit.
l
Decrease tension (counterclockwise).
Decrease tension when using lightweight media. Use the "torque adjustment handle" provided.
Using the Edge Guides (TS)
Adjust the edge guide position to suit the roll media diameter.
Media diameter Distance between edge guide and
media edge
Not more than ⌀120 mm 1mm
⌀121 mm to ⌀160 mm 3mm
⌀161 mm to ⌀200 mm 5mm
l
Removing the Edge Guides
1
Turn the knob screw and open the edge guide cover.
2
To Next Page
Loading...
