5-11
Chapter 5 Troubleshooting
1
2
2
2
5
Expiration (2MONTH)
The expiration date on the ink has
passed.
(2 months from the expiration
date)
• Two months have passed after the expi-
ration date.
Replace the ink bottle generating the
warning with a new one.
• If you want to replace it with a new ink,
please perform the P.4-24 “Discard the
expired ink”.
Tank End
The ink in the ink tank has run out.
(remaining less than 300cc)
• Please shirttail the ink to the ink tank
warning is occurring. ( P.1-10)
Tank Near End
The ink in the ink tank is low.
(remaining less than 400cc)
Charge Near End
The remaining amount of ink charged in
this machine is low.
• Charge the ink into the ink tank which the
warning occurred. ( P.1-10)
Charge End
The ink remaining in the printer has
reached zero.
AD VAL Error
Abnormality occurs in the weight balance
of the supply unit.
• Please make sure if correctly set the
weight to the ink tank, do not give a
shock, or do not put the things that
becomes a load.
• Please execute the P.4-28 “Tank Calibra-
tion”.
• Please turn on the power again.
• After the above operation, if not resolved,
please contact our service office or our
distributor in your region.
Message Cause Solution
To Next Page
Loading...
