MIMAKI TS500P-3200 - Page 69

3-23
3
2
2
Set the event to send an event mail
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”
and press the key.
3
Press the
(>>)
twice.
4
Press to select “Network & Mail”
and press the key.
5
Press to select “Event Mail” and
press the key.
6
Press to select “Select Event”
and press the key.
7
Press to select the event, and
press the
(  )
.
• After selecting the event, press the [FUNC2] key
and put a check in the check box.
An email will be sent when the event whose box
has been checked occurs.
• To select multiple events, use [][] to put the
cursor over the events you want, and put a check
in their boxes by pressing [FUNC2].
8
Press the key.
9
Press the key several times to
end the setting.
Set the e-mail address
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”
and press the key.
3
Press the
(>>)
twice.
4
Press to select “Network & Mail”
and press the key.
5
Press to select “Event Mail” and
press the key.
6
Press to select “Mail Address”
and press the key.
7
Press to set mail
address and press the key.
• Set the e-mail address to which you send the
event mail.
• Set it with alphanumeric characters and symbols
within 96 characters.
8
Press the key several times to
end the setting.
Set the subject
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”
and press the key.
3
Press the
(>>)
twice.
4
Press to select “Network & Mail”
and press the key.
5
Press to select “Event Mail” , and
press the key.
6
Press to select “Message
Subject” and press the key.
7
Press to set subject,
and press the key.
• Set the characters to write in the subject of the
event mail.
• Set it with alphanumeric characters and symbols
within 8 characters.
8
Press the key several times to
end the setting.
Event name Outline
Print Start
Sets sending/not sending of an email when
printing starts.
Peint End
Sets sending/not sending of an email when
printing ends.
Error Event
Sets sending/not sending of an email when
printing is stopped due to occurrence of an
error.
Warning
Event
Sets sending/not sending of an email when a
warning occurs during printing.
Other Event
Sets sending/not sending of an email when an
event other than the above occurs.