MIMAKI TS500P-3200 - Page 70

3-24
Set the server
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”
and press the key.
3
Press the
(>>)
twice.
4
Press to select “Network & Mail”
and press the key.
5
Press to select “Event Mail” , and
press the key.
6
Press to select “Server Setup”
and press the key.
7
Press to select “SMTP Address”
and press the key.
8
Press to set SMTP
Address and press the key.
• Press the jog key [][][][] to set SMTP
address.
• Input the SMTP address name.
9
Press to select “SMTP Port No.” ,
and press the key.
10
Press to set SMTP Port No. and
press the key.
• Set the SMTP port number.
11
Press to select “Sender Mail
Address” and press the key.
12
Press to set Sender Mail
Address and press the key.
•Press [][][][] and set the e-mail address to
be used as the sender mail address.
• Set it with alphanumeric characters and symbols
within 64 characters.
13
Press to select “Authentication”
and press the key.
14
Press to set authentication
method, and press the key.
• Set the authentication method of the SMTP
server.
• When you select [POP before SMTP], proceed to
the Step 15.
• If you select [SMTP Authentication], after the
operation of the steps 15-18, go to step 23.
• When you select [OFF], proceed to the Step 23.
15
Press to select “User Name” and
press the key.
16
Press to set User Name
and press the key.
•Press [][][][] to set the user name to use
for the authentication.
• Set it with alphanumeric characters and symbols
within 30 characters.
17
Press to select “Password” and
press the key.
18
Press to set Password
and press the key.
•Press [][][][] to set the password to use for
the authentication.
• Set it with alphanumeric characters and symbols
within 15 characters.
19
Press to select “POP3 Address”
and press the key.
20
Press to set POP3
Address and press the key.
•Press [][][][] to set POP server.
• Input the POP server name.
21
Press to select “APOP” and
press the key.
22
Press to set ON/ OFF and press
the key.
23
Press the key several times to
end the setting.
• Depending on your server, if you do not
set the e-mail address not supporting the
account, sending/ receiving e-mails may
be unavailable.
• On the password setting screen, you can
only check the value that you are currently
inputting.