Operating Your Analyzer
6-11
z If you intend to do the background check instead of a patient sample, enter
“0” into the “ID” box.
All info mode (external keyboard needed)
Entering Edit
At the “Count” screen, press [F1] and an edit window will pop up, as Figure 6-6 shows.
Figure 6-6 Entering sample information
Entering sample ID
ENTER the ID number in the “ID” box, or if you have the bar-code scanner installed, you can
simply scan the sample ID into the analyzer.
Selecting patient gender
SELECT
the desired item
from the “Gender” drop-down list
,
as Figure 6-7 shows. Note
that you can select blank in case you are not aware of the patient gender.
To Next Page
Loading...
