Mindray BC-2800 - 9 Using the Calibration Programs; Introduction

9-1
9 Using the Calibration Programs
9.1 Introduction
The purpose of the calibration is to maintain system accuracy. Quality of the calibration
depends on the calibration materials and reagents used. You should only use the calibrator
and reagents specified by Mindray for the calibration. Store and use the calibrator and
reagents as directed by their instructions for use.
Calibration may be performed with commercial calibrator or fresh whole blood samples. Only
the directly measured parameters WBC, RBC, HGB, MCV, PLT, and MPV may be calibrated.