Customizing the Analyzer Software
5-4
5.3 Editing Settings
You can use the “Settings” menu to edit system settings.
Press [MENU] to enter the system menu. SELECT “Setup → Settings“, as Figure 5-5 shows,
to enter the “Settings” screen, as Figure 5-6 shows.
Figure 5-5 System menu
Figure 5-6 “Settings” screen
This screen can be interpreted as follows:
Setting Groups area (on the left)
This area displays the visible or changeable setting groups. You can press [F1] to select the
desired group. The selected group is preceded by a ⊙.
Settings area (on the right)
You can change the settings of the items displayed in this area.
Help area (on the bottom)
To Next Page
Loading...
