Maintaining Your Analyzer
10-23
10.4 Using the “Status” Program
The items displayed in the “System Status” screen reflect how the analyzer is functioning
and contribute significantly to diagnosing analyzer errors. You may follow the instructions
given below to check those items.
Press [MENU] to enter the system menu and SELECT “Service → Status”, as Figure 10-33
shows, to enter the “Status” screen, as Figure 10-34 shows.
Figure 10-33 System menu
Figure 10-34 “Status” screen
At the “Status” screen you can only view the displayed status information and reference
ranges without changing them.
To Next Page
Loading...
