Operating Your Analyzer
6-24
Figure 6-18 Batch edit screen
Save
CLICK “Save” to save the changes.
Next/Prev
If you want to review the entered information of a specific sample, press the appropriate
arrow keys to CLICK “Prev.” or “Next” to review the previous or next sample until the desired
sample is reached.
Delete
If you want to delete the currently displayed sample information, CLICK “Delete” to complete
the deletion.
Exit
When you are done with the batch, CLICK “Exit” to exit to the “Count” screen. After a sample
is analyzed, its corresponding sample information will be automatically displayed in the
Current sample area.
6.8.2 Running the Samples
z Samples, controls, calibrator and waste are potentially infectious. Wear
proper personal protective equipment (e.g. gloves, lab coat, etc.) and follow
safe laboratory procedures when handling them in the laboratory.
To Next Page
Loading...
