Customizing the Analyzer Software
5-16
Figure 5-27 Setting HGB gain
Exiting “Gain” group
When you have finished changing all the desired gain settings, you may
1. Press [F1] to select another setting group you want to change; or;
2. Press [MENU] and a message box will pop up to remind you to save the changes, as
Figure 5-28 shows. CLICK “Yes” to save the changes and exit to the system menu; or
CLICK “No” to exit to the system menu without saving the changes.
Figure 5-28 Saving changes
5.3.5 Count
You can select the “Count” group to view or change (if you have the administrator password)
the parameter units and count time.
To Next Page
Loading...
