Customizing the Analyzer Software
5-11
printing device;
2. ENTER the desired report title.
Exiting the “Print & comm.” group
When you have finished changing all the desired printing and transmission settings, you may
press [F1] to select another setting group you want to change; or press [MENU] and a
message box will pop up to remind you to save the changes, as Figure 5-17 shows. CLICK
“Yes” to save the changes and exit to the system menu; or CLICK “No” to exit to the system
menu without saving the changes.
Figure 5-17 Saving changes
5.3.3 Date and Time
You can select the “Date & time” group to set the system date and time, as Figure 5-18
shows. Follow the instructions given below to do so.
Figure 5-18 Setting date and time
Selecting the “Date & time” group
Press [F1] to select the “Date & time” group.
Setting the system date
1. SELECT “Year”, ” Month” or ”Day”;
2. ENTER the desired digits.
To Next Page
Loading...
