Customizing the Analyzer Software
5-12
Selecting the date format
You may choose one of the three formats “YYYY-MM-DD”, “MM-DD-YYYY“ and
“DD-MM-YYYY”. To do so, SELECT the desired format from the “Format” drop-down list,
as Figure 5-19 shows.
Figure 5-19 Setting date format
Setting the system time
1. SELECT “Hour”, “Minute” or “Second”;
2. ENTER the desired digits.
Exiting the “Date & time” group
When you have finished changing all the desired date and time settings, you may
1. Press [F1] to select another setting group you want to change; or;
2. Press [MENU] and a message box will pop up to remind you to save the changes, as
Figure 5-20 shows. CLICK “Yes” to save the changes and exit to the system menu; or
CLICK “No” to exit to the system menu without saving the changes.
Figure 5-20 Saving changes
To Next Page
Loading...
