Customizing the Analyzer Software
5-10
To activate or deactivate this option, SELECT “Yes” or ”No” from the “Handshake”
drop-down list, as Figure 5-15 shows.
Figure 5-15 Setting handshake
Auto Communication
The auto communication function refers to the analyzer’s ability to automatically transmit the
analysis results to an external computer once they are done. To activate or deactivate this
function, SELECT “On” or ”Off” from the “Auto” drop-down list in the “Transmit” field, as
Figure 5-16 shows.
Figure 5-16 Auto communication
Editing report titles (external keyboard needed)
To edit the title of an analysis report,
1. SELECT “Recorder” or ”Printer” in the “Report Title” field, depending on the selected
To Next Page
Loading...
