Reviewing Sample Results
7-12
Figure 7-19 Reviewing the selected results
Example4: To deselect the sample results of locations 1 to 5 and 7 to 8, follow the procedure
below to do so:
1. Deselect the sample results of locations 1 to 5 as instructed in steps 1 to 3 of Example2;
2. Deselect the sample results of locations 7 to 8 as instructed in steps 1 to 3 of Example2;
3. CLICK “Quit” to return to the sample table review screen. The “*” above those sample
results will disappear, as Figure 7-20 shows.
Figure 7-20 Reviewing the deselected results
Transmitting sample results to a host
You can transmit the selected or all sample results to an external computer (a host). Press
[F3] to enter the “Transmit” window, as Figure 7-21 shows.
To Next Page
Loading...
