Reviewing Sample Results
7-15
Trend
After entering the administrator password, you can enter the “Special Functions” screen
open to administrators, as Figure 7-24 shows. Press [F1] to access the “Trend”, which
displays the WBC, RBC, PLT, HGB, MCV and RDW-CV trends of the selected sample results.
The six trends are displayed in two screens, three trends in one, as Figure 7-25 and Figure
7-26 show. You can press [↑][↓] to switch between the screens. The selected results are
sequentially presented in the trend, newest at the utmost left (No. 1).
Figure 7-25 “Trend” screen (1)
Figure 7-26 “Trend” screen (2)
At either screen, you can press [←] or [→] to view the results (displayed below the parameter
box) of every point presented in the graph. The current cursor position is displayed to the
right of “No.” and the time at which the sample was analyzed is displayed to the right of
“Time”. You can also press [PgUp] or [PgDn] to jump forward or backward by 20 samples.
To Next Page
Loading...
