Reviewing Sample Results
7-30
Figure 7-47 Searched histogram screen
Browsing sample results
Press [←] or [→] to browse the preceding or following sample result; press [PgUp] or [PgDn]
to jump 8 locations (e.g. jumping from location 1 to location 8 ).
Switching to the “Table” mode
To switch to the “Table” mode, press [↓]; to switch back to the “Histogram” mode, press
[↓] again.
Jumping to a sample result with known location
Press [F1] and a “Goto” window will pop up, as Figure 7-48 shows.
Figure 7-48 “Goto” window
To Next Page
Loading...
