Mindray BC-2800 - Page 169

Using the QC Programs
8-13
Figure 8-16 “QC Table” screen
If you want to delete all the saved results, press [DEL] and a message box will pop up to
confirm the deletion, as Figure 8-17 shows.
Figure 8-17 Deleting all the result
CLICK
“Yes” to delete current result; CLICK “No” to abort the deletion.
If you want to transmit the saved QC results to an external computer, follow the steps given
below:
1. Press [F1] at “QC Table” screen to enter the dialog box shown in Figure 8-18;
2. SELECT “Yes” to confirm the transmission.