Mindray BC-2800 - 6.2.11 Draining Tubing Procedure

Customizing the Analyzer Software
5-18
*.** 10
12
/L Default
*.** 10
6
/uL /
*** 10
4
/uL /
RBC
*.** /pL /
**.* % Default HCT
.*** L/L /
***.* fL Default MCV, RDW-SD
***.* um
3
/
RDW-CV **.* % Default
**** 10
9
/L Default
**** 10
3
/uL /
***.* 10
4
/uL /
PLT
**** /nL /
***.* fL Default MPV
***.* um
3
/
PDW **.* / Default
.*** % Default PCT
*.** mL/L /
*.*** pg Default
MCH
**.** fmol /
Follow the steps given below to select the units.
1. Enter the administrator password as introduced in Chapter 5.2.1;
2. At the “Settings” screen, press [F1] to select the “Count” group;
3. SELECT the desired unit from the drop-down list of the desired parameter, as Figure
5-30 shows.