Software Installation &Maintenance 6-1
6 Software Installation
&Maintenance
6.1 Enter Maintenance
Before the maintenance operation, the engineer should login the system with the
account of Service.
Login:
1. When Access Control is disabled: press [ctrl]+[/] to open the login dialogue box and select
Service as the user name. If Access Control is enabled, log in as the admin first and then
press [ctrl]+[/] to see the Service in User Name.
2. Log in the system with the account of Service. Press [Setup] to select [Maintenance]→[Setup]
to enter the related maintenance menu.
To Next Page
Loading...
