Mindray DC-70T

I
Revision History
Mindray may revise this publication from time to time without written notice.
Revision
Date
Reason for Change
1.0
2014.07
Initial release
2.0
2014.10
Change the Order Number in FRU table
3.0
2015.6
1. Section 2.1.3 add printer SONY UP-D898MD and SONY UP-X898MD
2. Chapter 8, change the part number of the gel warmer.
3. Section 11.1.5, add the indicator status of the gel warmer.
4. Section 11.3.6, add the abnormality information of the gel warmer.
4.0
2015.9
Chapter 8, change part numbers of 19-inch display and the trackball.
5.0
2015.10
Chapter8, change part number of the power assembly, add power lables.
6.0
2016.4
Add the FRU of new wet wire net.
7.0
2016.7
Add the FRU of PC module.
8.0
2016.10
Update the PC module.
9.0
2017.5
Update the FRU of SSD module.
10.0
2017.9
Add Russian FRU number.
11.0
2019.04
In chapter 8 and 10, update IO and wireless adapter assemblies.
© 2014-2019 Shenzhen Mindray Bio-medical Electronics Co., Ltd. All Rights Reserved.