9-30 Structure and Assembly/Disassembly
9.3.15.8 Touchscreen Assembly
The disassembly tool: cross-headed screwdriver (M3, M4).
1. Unscrew four M4 X 12 SEMS screws from the touchscreen to remove it.
9.3.16 Face Cover Assembly of the Speaker/Speaker
The disassembly tool: cross-headed screwdriver (M3, M4).
1. Unscrew two M4 X 12 SEMS screws from the face cover assembly of the speaker. Lift the
assembly towards the arrow’s direction. Same procedures to remove right assembly.
The connecting cables lie behind the rear cover of the touchscreen. Be careful of
the cables when removing the assembly.
To Next Page
Loading...
