The Basics
2-14
left.
You may select a parameter label to open the setup menu of this parameter. Each of
the parameter is described in more detail in the following chapters. If you select to
turn OFF the alarm of a parameter in its corresponding setup menu, an Alarms
Disabled icon will be displayed aside the parameter label. For more information, see
6.3.1 Alarms Disabled.
8. Prompt information area
The battery symbol in this area displays the status of the battery. For more
information, please refer to 2.5 Batteries.
Upon turning ON the monitor, prompt information, for example “NIBP alarm
disabled”, will cover the battery symbol.
9. STANDBY label
You may select this label to enter the standby mode. For more information, please
refer to 5.6 Standby Mode.
To Next Page
Loading...
Need help?
General
