6-6 Display & Cine Review
Select “all” in the drop-down list of “Exam History” to see all exam files, then you can select
different images of different exams to compare.
3. Repeat the step above to add the image to be compared.
On the top-right corner, there is “Selection” column you can filter the images by selecting “All
Items”, “Selected”, “Unselected”.
Click [Clear Selected] to clear all selected images.
4. Click [OK] to enter image comparison.
5. Switch the multi-frame cine among the windows to review (single-frame image cannot be reviewed).
Press <Dual> to toggle between the two images.
Press the user-defined <Quad> key to switch among 3-4 images.
The window with the highlighted “M” mark is the current activated window.
You can select the image to be reviewed at synchronous time when the multi-frame image is
reviewed. Tap [SyncPlay] on the touch screen to display: synchronously, asynchronously.
6. Save the image if it is necessary.
7. Click [Return] on the screen or press <Freeze> to exit image compare.
6.5.2 Frame Compare
1. Freeze the image in B/C mode, tap [Frame Compare] in “Cine” page on the touch screen to enter
frame comparison mode.
2. Review the images of different image windows (cine replaying can’t be performed for single-frame
image file), press <Update> or <Dual> key to switch the active image window.
3. Save the image if it is necessary.
Measurements, adding comments and body marks are allowed.
4. Tap [Frame Compare] again to return to image frozen status; press <Freeze> to enter real-time
imaging.
Tips: cine compare can only be performed for B/C mode image only. The image on dual/quad window
cannot be compared.
6.5.3 iCompare
1. Set the user-defined key to enter iCompare.
2. In live mode or freeze mode, press the user-defined key for iCompare.
3. Select a single-frame image, multi-frame image, or screenshot in the iStation screen (press
<iStation> to enter), Review screen (tap <Review> to enter), or thumbnail area in the main screen.
4. Press the <Dual> key to switch between the left and right windows. Roll the trackball to review the
cine image on the screen one by one.
The window with the highlighted “M” mark is the current activated window.
When the left window is a screenshot, you cannot switch windows.
5. Save the image if it is necessary.
Measurements, adding comments and body marks are allowed.
6. Press <B>, user-defined <Single> key, or the user-defined key to exit iCompare.
Tips: iCompare can only be performed on B, Color, Power, PW, CW, or M mode for
FRM/CIN/PNG/DCM files.
To Next Page
Loading...
Need help?
General
