Setup 12-11
4. List Config: select a desired group from the drop-down list.
5. After you customize comments, click [OK] to confirm and exit the screen.
Comment Group Define
You can add user-defined comment group for current exam mode. The groups in the library are
provided by the system or user-defined ones.
1. Add groups: position the cursor in the field box near [Lists Name], enter the group name through the
keyboard, and then click [Add Group]. Then the entered group will be added to the Group Lists.
2. Rename groups: select a user-defined group, enter the group name through the keyboard, and then
click [Rename]. Then the new group name will be displayed in the group lists.
3. Delete groups: select a user-defined group, click [Delete Group]. After a user-defined group is
deleted, it will not be available.
4. Add comments to groups: the operation is the same to that of the "Comment Configure" tab.
5. Delete comments: select an item from the selected items and click [Delete].
6. Change position of the selected items: the operation is the same to that of the "Comment Configure"
tab.
7. After you customize groups, click [OK] to confirm and exit the screen.
Note: You can rename, delete, add comment to, delete comment from, or change position of the
selected items in the user-defined groups, while system standard groups cannot be modified
12.5 iWorks Preset
For details, see Chapter Appendix B iWorks (Auto Workflow Protocol).
12.6 Stress Echo Preset
For details, see Chapter 5.15 Stress Echo.
12.7 DICOM/HL7 Preset
For details, see Chapter 11 DICOM/HL7.
To Next Page
Loading...
