C-2 Wireless LAN
3. The system tries to connect and the wireless manager icon turns into . The icon turns into
or after successful connection.
When the system background is processing network task (DICOM sending for example),
please do not enter network setting to change the IP or EAP, otherwise the background
task may fail. You can check if there are tasks undergoing in the task manager.
IP Config
IP config is used for setting local network parameters, which is also applied to DICOM connection.
1. In Wireless network manager screen, click [IP Config] to open the page:
If “DHCP” is selected, the IP address will be automatically obtained from the DNS server.
If “Static” is selected (using a static IP address), enter the IP address.
IP address of the system should be in the same network segment with the server.
Subnet Mask: set different network segment.
Gateway: set the gateway IP.
To Next Page
Loading...
