4 - 2 Operator’s Manual
4 Setup
4.1.1 Region
Set the hospital name, language, time zone, time format and system date/time.
4.1.2 General
Set patient information, exam setup, display, screen saver and so on.
Key Config To assign functions to the F keys of the key board.
Gesture Preset the gesture on the touch screen.
Output Set the output format, the range and the resolution for the image.
Access Control To set the user account control relevant information.
Scan Code To set the code parameters for barcode reader.
Key Probe To assign the functions to the buttons on the probe.
Biopsy To set the Biopsy grid parameters.
Item Description
Item Description
HOSPITAL
INFORMAT
ION
To set the hospital-relevant information such as name, address, telephone, and so
on.
Load Logo Import image for logo loading.
NOTE:
For a better display effect, please try to use an BMP image with 400*400 pixels.
Language To select a language (input) for the system.
Time Zone To select the time zone.
System Date To set the date for the system.
Date Format To set the date format.
System Time Move the cursor over the corresponding field and enter the time manually using the
keyboard, or, move the cursor over the time segment and press <Set>, then increase
or decrease the required value by clicking the icons on the right side.
Time Format To select the time format.
Time Synch To assign a time server and make the time of the ultrasound machine consistent
with the server.
To Next Page
Loading...
Need help?
General
