Mindray TEX20 Operator's Manual

6 - 4 Operator’s Manual
6 Image Acquisition
Dual Live
Display different image effects of one probe for a better observation.
Two pages of adjustable parameters are displayed on the touch screen as well; where, shared
parameters and left window parameters are displayed in the B (L) page, while right window
parameters are displayed in the B(R) page.
In the image parameter area, parameters of the both windows are displayed.
It supports the magnification of the image.
Dual
Enter Dual mode in Non-Dual mode.
For linear probes, you can switch screen splitting between horizontal and vertical layout you can
switch between the 2 modes by using “V1:1” parameter.
Zoom
Adjust to zoom in/out the image. The parameter “Z” refers to the magnification value.
Echo Boost
This function can improve contrast and decrease noise, so that a much clearer boundary can be
seen.
HD Scope
The image inside the ROI is clearer than these outside when the function is enabled.
Tap [HDScope] on the touch screen, the ROI appears. The image inside the ROI is clearer than the
outside.
When the ROI box is solid line, tap to change its position.
When the ROI box is dotted line, tap and drag to change the size.
Tap to switch between the solid line and the dotted line status.
Tap [HDScope]. The image effect increases as the value changes.
Off represents the disable. The larger the value is, the clearer the image becomes.
The function is disabled for wireless probe.
Image Merge
In the Dual-split mode, when the images of the two windows have the same probe type, depth,
invert status, rotation status and magnification factor, the system will merge the two images so as to
extend the field of vision.
Tap [Auto Merge]] on the touch screen to enable/disable the function.
Only linear probes support this function.
Optimize Speed
It refers to adjusting the acoustic speed according to tissue characteristics.
Tap [SSC] on the touch screen to optimize the speed. SSC status and SSI value is displayed in real
time.
The function is disabled for wireless probe.
V 1:1
This function is to display images in vertical format in the dual-split mode. After the feature is
enabled, one image appears above, and the other image appears below.
In the dual-split mode, tap [V 1:1] to enable this function.

Mindray TEX20 Specifications

General

Brand	Mindray
Model	TEX20
Category	Diagnostic Equipment
Language	English