Minebea Intec Ex Indicator Midrics 1 - Info; Service; Term

— 9 Menu level: 9
— 9.1 Factory settings for the "Operation" number
menu
— 9.1.1 Yes
— 9.1.2 * No
— SERVICE Service date (see Chapter 6.4.1)
— TERM indicator serial data (see Chapter 6.4.2)
— WP-1 Weighing platform device data (see
Chapter 6.4.3)
— FLEX.INF FlexPrint settings (see Chapter 6.4.4)
— LEGAL.ST Alibi memory data (see Chapter 6.4.5)
— SERVICE Service date
— 00.00.00 Day.Month.Year (e.g. 13.08.10)
— TERM Indicator serial data
— 1: MIXS1 Model type
— 2: 10405355 Serial number (complete display with tare key)
— 3: 01.90.01 Software version (complete display with tare
key)
— 4: MX 300.150516 Application software version
— WP-1 Weighing platform device data
— MIXS1-ADC Model type, otherwise hidden when used as
secondary display
— 00-42-52 Weighing sensor software version
— 10405355 Serial number of weighing sensor, otherwise
hidden when used as secondary display
— 1452
Latitude (in degrees)
1)
— S1 150
Altitude (in meters)
1)
— 618.91
Gravitational acceleration in m/s
2 1)
— GESCHLOSSEN Status of the locking switch on the weighing
sensor
1)
Warning: Symbols 12 ashes (all at the same time)
* Factory setting
6.4 INFO
Display of the device-specic information
INFO
6.4.1 SERVICE
INFO
6.4.2 TERM
INFO
TERM
6.4.3 WP-1
INFO
1)
Either output latitude and geographical height or output gravitational acceleration
(depending on input before declaration of conformity)
6 Menu structure Ex Indicator Midrics 1 (MIXS1)
Minebea Intec EN-61