Minebea Intec Ex Indicator Midrics 1 - Setup

— OFF *
Key not assigned
— GRO NET Gross/net switch
— 2. UNIT Display of the 2nd unit
— RES 10 10-times higher resolution
— WP-1 Settings for weighing platform 1 (see
Chapter 6.3.1)
— COM-1 Adjust the RS-232 interface (see Chapter 6.3.2)
— CTRL IO Specifying the function of the universal input
(control line) (see Chapter 6.3.3)
— PRTPROT Adjust the print protocols (see Chapter 6.3.4)
— UTILIT Settings for additional functions (see
Chapter 6.3.5)
— TIME Setting the time
(Input: e.g. 10.07.41 (Hours. Minutes. Seconds))
— DATE Setting the date
(Input: 01.05.02 (Day. Month. Year)
(U.S. mode: (Month. Day. Year)
— U-CODE User code word
Set, change and delete code word
(max. 8 digits): e.g. 12345678
— WP-1 Settings for the weighing platform
— INTERN Settings for weighing platform (see
Chapter 6.3.1.1)
— COM-1 Settings for external scale connected to COM-1
interface (see Chapter 6.3.1.2)
— WP-1 Settings for weighing platform 1
— INTERN Internal ADC
— 1 Menu level: 1
— 1.1 Adjustment to the installation location (lter
adjustment)
— 1.1.1 Very steady environment
— 1.1.2 * Steady environment
FN-KEY
* Factory setting
6.3 SETUP
Adjust device settings to user requirements. If a password is active, there will be a
password request.
SETUP
6.3.1 WP-1
SETUP
WP-1
6.3.1.1 INTERN
SETUP
INTERN
Ex Indicator Midrics 1 (MIXS1) 6 Menu structure
EN-50 Minebea Intec