Minebea Intec Ex Indicator Midrics 1 - Page 56

Increase resolution by 1 verication interval
(e.g.from 2 g to 1 g or 10 g to 5 g)
— 3.3 Weight unit 3 (depending on weighing platform
type)
(for parameters see 3.1 "Weight unit 2")
— 3.4 Display accuracy 3
(for parameters see 3.2 "Display accuracy 2")
— 9 Menu level: 9
— 9.1 Factory settings of the number menu for WP1
— 9.1.1 Yes
— 9.1.2 * No
— ADC-CON Analog-to-digital converter (ADC) conguration
SM)
(see Chapter 6.6)
— WP-1 Settings for weighing platform 1
— COM-1 Adjusting the RS-232/422 interface for external
scale
— RS232 RS-232 interface settings for external scale
— SBI-STD SBI scale, standard version
— SBI-APP SBI scale, calibration mandatory
— BPI.232 1.1. (as under INTERN)
— … …
— ADC-232 1.1. (as under INTERN)
— COM-1 Adjustment of the RS-232/422 interface
— OFF * O
— WP-1 Settings for the weighing platform (see
Chapter 6.3.2.1)
— DATPROT Data protocols (see Chapter 6.3.2.1)*
— PRINTER Congure printer (see Chapter 6.3.2.2)
— COM-1 Adjustment of the RS-232/422 interface
— DATPROT Data protocols
1)
Not possible for veried scales
2)
Factory setting for veried devices
SM)
only visible in service mode
* Factory setting
6.3.1.2 COM-1
SETUP
COM-1
6.3.2 COM-1
SETUP
COM-1
* Factory setting
6.3.2.1 DATPROT
SETUP
Ex Indicator Midrics 1 (MIXS1) 6 Menu structure
EN-54 Minebea Intec