If the automatic tare function is active, you do not need to tare the scale by pressing
the key. The scale automatically takes over the tare weight as soon as the
container is placed on the scale and thecontainer has exceeded the selected
minimum load.
2. Press the key to zero the scale.
The zeroed scale display appears.
3. Place the empty container on the scale.
4. Press the key to tare the scale.
The display for tared scale with container appears.
Ex Indicator Midrics 1 (MIXS1) 7 Operating
EN-70 Minebea Intec
To Next Page
Loading...
