Minebea Intec Signum 3 Ex - General Password

133
Signum 3 Ex
General Password
Appendix: General Password
After selecting the “Setup” menu item
a request to enter the access password
“Code” will be shown on the display for
2seconds�
The place for the first character of the
password flashes�
Press repeatedly
k
,
)
;
Enter password
– Enter the numbers with the k key
and save with the ) key�
Press the k key (numbers in
ascending order: 0-9) or the p key
(numbers in descending order: 9-1)
until the required character appears on
the display�
If the password is longer than
7characters the rst character will be
displaced to the right and out of the
display�
The password set is shown on the
display�
Press repeatedly
k
,
)
;
Press repeatedly
k
,
)
;
Press repeatedly
k
,
)
;
Press repeatedly
k
,
)
;
Press repeatedly
k
,
)
;
Press repeatedly
k
,
)
;
Press repeatedly
k
,
)
;
)
Conrm the password
(
Exit from the menu level
)
(press and hold) Save settings and exit menu
Service password:
202122
General password:
40414243