Minebea Intec Signum 3 Ex - Net-Total Formulation

70
Signum 3 Ex
Net-total Formulation Application R
Net-total Formulation
Application R
With this application, you can weigh in
different components up to a defined
total� Each component is saved in the
net-total memory�
Characteristics
– Weigh in up to 999 components in
series
– Net total formulation cannot be
combined with a level 1 or level 2
application
– Current component number displayed
in the text lines (indicating the
component to be added)
– Toggle the display from “component
mode” to “additive mode” by pressing
the w key�
– Component mode: Display the weight
of the component currently on the
platform (for 1 second after it is
saved; then the platform is tared)
– Additive mode: Display the weight of
all components on the platform (after
it is saved, the net weight of the last
component added is displayed briey)
– Activate Info mode with the I key
– Automatic component printout when it
is saved� Congured in Setup under:
appl 3:
Net Tot: 3.17.
If the 3.17.2 menu item is selected,
theentire component record is printed�
If the 3.17.3 menu item is selected, the
following items are generated only once
for the rst component:
Blank line, date, time, ID1 through ID4,
header lines 1 and 2� For subsequent
components, each “component” item
(“Comp xx”) is followed by a blank line�
– Automatic taring of container weight�
Configured in Setup under:
Appl: a.tare: 3.7.
– Restore factory default settings�
Congured in Setup under:
Appl: def.app: 9.1.
Net-total Formulation Application R