Minebea Intec Signum 3 Ex - Page 69

69
Signum 3 Ex
Totalizing Application s Totalizing Application s
Example:
Totalizing weight values�
Settings (dierent from the factory settings):
Setup: Application 3: Totalizing
Setup: Printout, PRTPROT 7�6
Setup: Device Parameters: Printout: Printer 1: Select “Component log:
Auto printout”, then select the menu line items of your choice PRT PROT: 7�7�
Setup: Printout: Printer 1: Select “Total data record:
Printout as per CF key,” then select the menu line items of your choice PRTPROT: 7�8�
1�) Place the first weight on the
weighing platform
Weight value is displayed
O
2�) Store rst weight value in
totalizing memory
G# + 0.250 kg Component weight is printed
T + 0.000 kg automatically (congured
N + 0.250 kg component log)
n 1
The transaction counter value
is increased by one�
3�) Remove the rst weight from
the weighing platform
4�) Place the second weight
onthe weighing platform
Weight value is displayed
O
5�) Store second weight value in
totalizing memory
G
# + 1.346 kg Component weight is printed
T + 0.346 kg automatically (congured
N + 1.000 kg component log)
n 2
The transaction counter value
is increased to two
W
6�) Toggle display between
individual value and total
c
7�) End totalizing
*G + 1.346 g Component weight is printed
*N + 1.250 g automatically (congured
n 2 component log)�
-------------------