Minebea Intec Signum 3 Ex - Examples of Application Combinations in Signum

74
Signum 3 Ex
Examples of Application Combinations
Example: “Portioning” (counting, checkweighing with totalizing)
Settings (dierent from the factory settings):
Setup: Application parameters: Application 1: Counting (count)
Setup: Application parameters: Application 2: Checkweighing (check.wg)
Setup: Application parameters: Application 3: Totalizing: Saved value: Net + Calculated (3.23.3)
Setup: Application parameters: Application 3: Totalizing: Autosave: On (3.16.2)
Setup: Application parameters: Application 3: Totalizing: Source of data: Application 2 (3.22.2)
Setup: Printout: PRT PROT 7�8� Printer 1:
“Total: Print printout when FN pressed,” then select the menu line items of your choice (x.xx.x)
e
1�) Switch on the scale and enter settings as above
c
2�) Delete any data from previous operation
3�) Place empty container on the platform�
)
4�) Tare the scale�
Note: If the automatic tare function is enabled, you do not need to press the ) key to tare the
platform; the tare weight is saved automatically when you place the container on the platform
5�) Place a number of parts in the container for the reference quantity (in this example, 10 pcs)
O
6�) Start calculation of reference sample weight
Examples of Application Combinations