85
Signum 3 Ex
Data Interface
GMP-compliant
Printouts
When the corresponding menu item is
active, the printout is bracketed by a
GMP header and a GMP footer (GMP:
“Good Manufacturing Practice”)�
The GMP header precedes the rst
measured result� The GMP footer is
printed after the last result in a series
of measurements (“GMP-compliant
printout always for several application
results,” menu item 7�13�3)�
To end a series of measured results,
press and hold the
p key� In this
case, the A symbol is displayed after
the GMP header is printed and remains
in the display until the GMP footer is
printed�
A GMP-compliant printout is generated
automatically at the conclusion of
calibration/adjustment, linearization
routines, as well as when you set or
clear a preload�
Three examples of GMP headers and one example of a footer are shown in the following�
Weighing platform WP 1:
------------------- Dash line
14.01.2017 09:43 Date/time
Type SIWX Signum
®
Type
Ser.no. 12345678 Signum
®
Serial no�
Vers. S3 207.171214 Software version Application
BVers. 00-37-2B Software version Basic software
------------------- Dash line
GMP footer:
------------------- Dash line
14.01.2017 9:45 AM Date/time
Name: Field for signature
Space line
------------------- Dash line
Data Interface
85
To Next Page
Loading...
