Minebea Intec Signum 3 Ex User Manual

78
Signum 3 Ex
Product Data Memory
Product Data Memory
Purpose
The product data memory stores
initialization data and user data
(product and tare values)�
Characteristics
– The product data memory has 100
memory cells for product or tare values�
– For example, you can store 80 sets of
application data and 20 tare values�
– Each memory cell is uniquely identied
by a number up to three digits�
– The product data memory can be used
with the following applications:
Application level 1
–
weigh.
–
count.
–
neutr.m
–
anim.wg
–
perc.wg
Application level 2
–
check.wg
– class.
– Data records can be created, overwritten
and individually deleted
– Data remains stored when the scale is
switched off
Functions
Saving product data (in this example, in
the Counting application):
§ Initialize the application�
§ Enter a memory number and press and
hold the R key (min� 2 seconds)�
Saving preset tare values:
§ Allocate preset tare memory�
§ Enter a memory number and press and
hold the t key (min� 2 seconds)�
Activation of saved product or tare
values:
§ Enter a memory number and press the
R key�
Displaying information for a specific
product or tare value:
§ Enter a memory number and press
theI key�
§ Use the k key to select between
wRef (average piece weight) and
nRef(quantity)�
§ Use the ) key to scroll the displayed
value to the right�
§ Activate the displayed memory by
pressing the R key�
§ Delete the displayed memory by
pressing and holding the c key
(min�2 seconds)�
§ Exit the mode by pressing the c key�
Displaying information for all product
or tare memories:
§ Press the R key to display the rst
memory number�
§ Press the k key to scroll through in
lexical order (e�g� 1, 3, 333, 4, ���)�
§ Press the R key to activate the
selected memory number�
§ Display the saved product values using
the I key�
§ Press and hold the c key (at least
for 2 seconds) to delete the selected
memory number�
§ Exit the mode by pressing the c key�
Deleting a specific memory number:
§ Enter a memory number and press and
hold the c key�
Example:
Using the Counting application with
astored average piece weight�
Settings (dierent from the factory
settings):
Setup: Application parameters:
Application: Counting
(Count.)
Saving the average piece weight:
§ Initialize the application�
§ Determine the average piece weight
using one of the methods described
above�
§ Enter the memory cell number using
the keypad, and press and hold the
Rkey (min� 2 Seconds)�
Loading the average piece weight or
reference sample quantity:
§ Enter the memory cell number and
press the I key�
§ Use the k key to select between
wRef (average piece weight) and
nRef(quantity)�
§ Use the ) key to scroll the displayed
value to the right�
§ Activate the displayed memory by
pressing the R key�
§ Delete the displayed memory by
pressing and holding the c key
(min�2 seconds)�
§ Exit the mode by pressing the c key�
Overwriting data in memory cell:
§ To save a new average piece weight in
a memory cell already in use, enter the
desired memory cell number using the
keypad and press and hold the R key
(min� 2 seconds)� The previous average
piece weight is overwritten�
Deleting an average piece weight:
§ Enter the memory cell number of the
average piece weight to be overwritten
and press the I key�
§ Delete the displayed value by pressing
and holding the c key (min�
2seconds)�
Data Interface

Minebea Intec Signum 3 Ex Specifications

General

Brand	Minebea Intec
Model	Signum 3 Ex
Category	Scales
Language	English