2. Safety
MiR500 User guide (en) 09/2019 - v.1.3 ©Copyright 2018-2020: Mobile Industrial Robots A/S. 10
2.2 General safety precautions
This section contains general safety precautions.
WARNING
Using a charger different from the one supplied by the manufacturer can
cause a fire.
• Only use the original charger.
WARNING
The protective fields on the site of MiR 250 is only 10-15 mm. MiR500 may
drive over the feet of personnel. Risk of injury.
• All personnel must be instructed to wear safety shoes near an operating
robot.
WARNING
Contact with live parts can cause electric shock.
• Do not touch any internal components of MiR500 while it is powered.
WARNING
Unstable mounting of the UR robot arm. Risk of injury.
Make sure the UR Robot Arm is properly and securely bolted in place.
Unstable mounting can lead to accidents.
To Next Page
Loading...
