8. Maintenance
MiR500 User guide (en) 09/2019 - v.1.3 ©Copyright 2018-2020: Mobile Industrial Robots A/S. 131
8.3 Packing for transportation
This section describes how to pack the robot for transportation.
Original packaging
Use the original packaging materials when transporting the robot.
The packaging materials are:
• The bottom of the box (the pallet).
• The lid of the box (the ramp).
• The walls of the box.
• The wheel stop board.
• Protective foam blocks: Side blocks and the top layer.
• Protective corner braces. The braces prevent the robot from being damaged by the
transport straps.
• Screws.
To Next Page
Loading...
