8. Maintenance
MiR500 User guide (en) 09/2019 - v.1.3 ©Copyright 2018-2020: Mobile Industrial Robots A/S. 132
Packing the robot for transportation
To pack the robot for transportation:
1. Shut down the robot. See section .
2. Open the rear maintenance hatch.
3. Turn the battery disconnect switch to position OFF.
Repeat the steps in section Getting started on page65 in the reverse order.
NOTICE
Pack and transport the robot in an upright position. Packing and transporting
the robot in any other position voids the warranty.
Battery
The lithium battery is subject to transport regulations. Make sure that you follow the safety
precautions in this section and the instructions in section Packing for transportation on the
previous page. Different regulations apply depending on the mode of transportation: Land,
To Next Page
Loading...
