EasyManua.ls Logo

MIR 500 - Page 21

MIR 500
151 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Safety
MiR500 User guide (en) 09/2019 - v.1.3 ©Copyright 2018-2020: Mobile Industrial Robots A/S. 21
6. Pull out the battery.
7. Do the steps in reverse when putting in the battery.
Storage
The battery should be stored in an area with a room temperature between 15°C and 25°C.
Temperatures below or above this range will shorten the service life of the battery.
The battery should be stored in an area with at maximum of 80% (non-condensing) relative
air humidity.
The battery should not be exposed to nor submerged in any liquid.
Charge the battery before storage.
The battery is maintenance-free but may be cleaned occasionally. When cleaning, the
battery must be removed from any power source. Only use a dry and soft cloth to clean the
housing of the battery and do not use abrasives or solvents.
For disposal of batteries, see Disposal and environment on page136

Table of Contents

Other manuals for MIR 500

Related product manuals